Cleaning And Maintenance - Panasonic WEDEATSU EP1061 Instrucciones De Uso

DETAILS REGARDING MANUAL OPERATION
Shiatsu
This feels as though the thumbs of both
hands are being used to work on the
acupressure points. The initial strong
push is followed by a short pause to give
the impression of a professional shiatsu
masseur. This type of massage is ideal
for people with tight muscles and pain
who want a point massage.
Swedish
This motion is like the palms of both
hands being used to press and rub
over a wide area from both sides of
the body. This type of massage is
ideal for someone wanting a broad
massage on the back or lower back.
Knead
With this massage, a strong push is
followed by a quick release in a rhythm
that is designed to relax stiff muscles. It
is ideal for loosening stiff muscles in the
neck and shoulders.
Vibration
The minute vibrations are designed to
relax even the tensest body. Combined
with a rolling massage, etc., this type of
massage is ideal for the whole back.
24
Tap A
This motion resembles the outer edge of
the fingers being used to tap in a rhythmic
motion that is designed to penetrate into
the body and relax the muscles. It is ideal
to use on the fine muscles of the neck or
as a finishing massage.
Tap B
This motion is like a fist used in a rhythmic
pattern to provide a solid tapping that is
designed to eliminate stubborn stiffness
and tiredness. This kind of massage is
ideal for thick muscles such as those found
in the shoulders.
Whole Back Roll
The massage heads become rollers that
roll over the back up and down from the
neck to the lower back to stretch the back
muscles and relieve tension. It is ideal to
use at the beginning of a massage as it is
relatively soft.
Regional Roll
The massage heads become rollers that
roll over the back muscles, but this time in
a specified location. It is ideal for
combining with Knead, Tap B and
Vibration.

CLEANING AND MAINTENANCE

PILLOW, BACK CUSHION, SEAT AND ARMREST COVERS
• Rub the covers lightly using a soft and dry cloth for normal
cleaning.
(Please do not use a cloth containing any kind of chemicals.)
• If the covers becomes dirty, apply a 3–5% solution of a mild
detergent in warm water using a soft cloth, tapping the
surface to remove it. Afterwards, thoroughly rinse the cloth
and use it to remove the detergent, wipe it gently with a dry
cloth, and then leave it to dry naturally.
(Please do not use a hair dryer in an attempt to dry the
covers more quickly.)
• If the covers is allowed to come into contact with vinyl for an
extended period of time, this may cause it to become
discolored.
PIPES AND PLASTIC AREAS
z Wipe the unit with a cloth that has been
soaked in a mild detergent and then
thoroughly wrung out.
x Next wipe the unit with a cloth that has been
dampened with just water.
* Make sure you thoroughly wring out the
cloth first when cleaning the controller.
c Allow the unit to dry naturally.
• Never use benzene, thinners or alcohol.
SEAT FABRIC
z Wipe the seat fabric with a cloth that has been soaked in a
weak mild detergent solution and then thoroughly wrung out.
x Use a weak mild detergent to brush on to areas where the
seat fabric has become particularly soiled. Be careful not
to brush the fabric too much as this may cause damage.
c Next wipe the fabric with a cloth that has been dampened
with just water.
v Allow the fabric to dry naturally.
CAUTION
• Always remove the power plug from the power socket when cleaning the unit. Take care to dry your hands
thoroughly before attempting to plug the power plug back into the power socket when you have finished. Failure
to do so may lead to electric shock or burns.
Water
Mild
Detergent
Mild
Detergent
Water
Water
25