Sears Kenmore ULTRA WASH 665.1307 Manual De Uso Y Cuidado página 18

Ocultar thumbs Ver también para Kenmore ULTRA WASH 665.1307:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Ds
she
Selecting Cycles and Options
1. Select the desired cycle. If you want to run the last cycle that was completed,
you can simply press STARTonce to show which
options you used, then press START again to start the cycle.
2. Select the desired options. Not all options are available
for every cycle. If an invalid option is selected for a given cycle, the
lights will flash.
Turning OFF/ON
the Sound
Press and hold HIGH TEMP for 3 seconds to toggle sound ON and OFF. The sound will not be deactivated
for cycle interruption
or
service required messages.
1. Open the door slightly to stop the cycle. Wait for the spraying action to stop before completely
opening the door.
2. Press CANCEL/DRAIN
button once. The Cancel/Drain
light will light up.
3. Close the door within 3 seconds. The dishwasher starts a drain cycle (if water remains in bottom of dishwasher). Let the
dishwasher drain completely.
The Cancel/Drain
light turns off after 2 minutes.
You can interrupt a cycle and restart your dishwasher from the beginning using the following
procedure.
1. Open the door slightly to stop the cycle. Wait for the spraying action to stop, then open the door completely.
2. Check that detergent dispenser cover is still closed. If cover is open, you will need to refill the detergent dispenser before
restarting your new cycle.
3. Press CANCEL/DRAIN
twice to reset the control.
4. Select new cycles and options.
5. Press START/RESUME.
18
Tabla de contenido
loading

Tabla de contenido