Sears Kenmore ULTRA WASH 665.1307 Manual De Uso Y Cuidado página 17

Ocultar thumbs Ver también para Kenmore ULTRA WASH 665.1307:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Sani Rinse
This high temperature
option sanitizes
your dishes and glassware in
accordance
with National
Sanitation
Foundation (NSF)/ANSI
Standard
184
for Residential Dishwashers. Certified
residential dishwashers are not intended
for licensed food establishments.
The
Sani indicator
indicates at the end of the
cycle whether the Sani Rinse option was
successfully completed.
If the indicator
does not activate, it is probably
due to
the cycle being interrupted.
Pots & Pans
Normal Wash
Increases the main wash
temperature
from 105°F
(41°C) to 130°F (54°C) and
the final rinse from 140°F
(60°C) to 156°F (69°C).
Heated Dry
Turns the heat element on after the wash
cycle is completed.
Use rinse aid with or
without the Heated Dry option for best
drying results. Plastic items are less likely
to deform when loaded in the top dish
rack.
Available
with
any cycle except
Quick Rinse
Turns the heat element on
at the end of the wash
cycle.
55
lO0
0 - 1.8
(0- 7.0)
32
32
tThe maximum additional
water used for any combination
of options is 2.6 gal. (10.0 L).
Delay Hours (on some models)
Use this option to run your dishwasher during off-peak
hours. Local utility providers recommend using energy during off-peak
hours
when possible.
To delay the start
1. Select a wash cycle and options.
2. Press the delay button.
3. Press START/RESUME.
NOTE: Anytime the door is opened (such as, to add a dish), the START button must be pressed again to resume the delay
countdown.
Control Lock Option
Use the Control Lock option to avoid unintended
use of the dishwasher between cycles. When LOCI( ON is lit, all buttons are
disabled. The dishwasher door can still be opened/closed
while the controls are locked.
To turn on the Lock
Press and hold HEATED DRY for 3 seconds. LOCI( ON will light up. If you press any pad while your dishwasher is locked, the light
flashes 3 times.
NOTE: The dishwasher cannot start if the control is locked.
To turn off the Lock
Press and hold HEATED DRY for 3 seconds. The light turns off.
17
Tabla de contenido
loading

Tabla de contenido