Machine Features; Safety Instructions; Original Operating Manual - Drill - Festool DR 20 E Manual De Instrucciones

DR 20 E
GB
Original operating manual
1 Symbols
Warning of general danger
Risk of electric shock
Read the Operating Instructions/Notes!
Wear ear protection.
Wear a dust mask.
Wear protective goggles.
Do not throw in the household waste.
Only suitable for screwing into soft materi-
als!
2

Machine features

Chuck
[1-1]
[1-2] Release ring
Right/left switch
[1-3]
On/Off switch
[1-4]
[1-5] Mains power cable
Additional handle
[1-6]
Depth stop
[1-7]
The specified illustrations appear at the beginning of
the Operating Instructions.
3 Intended use
Drill suitable
– for drilling in metal, wood, plastics and similar
materials,
– for screwing in and tightening screws.
The user is liable for improper or non-intend-
ed use.
12
4 Technical data
Drill
Power
Idling speed
Max. torque
Chuck clamping range
Tool holder in drill spindle
Drill diameter max.
Steel
Aluminium
Wood
Flange
Weight
Safety class
* Static torque electronically limited
5

Safety instructions

5.1 General safety instructions
WARNING!
structions, illustrations and specifications
provided with this power tool. Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
5.2 Machine-related safety instructions
– Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory or fastener may contact hidden wiring
or its own cord. Cutting accessory or fasteners
contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the op-
erator an electric shock.
– Use auxiliary handles supplied with the tool. Loss
of control can cause personal injury.
– Avoid unintentional activation.Carrying the elec-
tric power tool with your fingers on the on/off
switch can lead to accidents.
– Wait until the power tool stops completely until
placing it down. The tool can become entangled
and lead to a loss of control of the power tool.
– The machine must never be operated when wet
or located in a damp environment. Connect devic-
es that you intend to use outdoors via an earth
leakage circuit breaker (FI) with a maximum re-
DR 20 E
0 - 650 rpm
98 Nm *
3 - 16 mm
Read all safety warnings, in-
1100 W
1/4 ''
20 mm
28 mm
65 mm
57 mm
3,2 kg
/II