Sears Kenmore 385.17628 Manual De Instrucciones página 14

Connecting Machine to ,Power Supply
(_) Power supply plug
(_ Outlet
Machine plug
(_ Power switch
(_) Machine socket
(_) Light bulb
Before connecting the power cord, make sure the
voltage and frequency shown on the machine
conform to your electrical power.
1. Turn off the power switch 0.
2_ Insert the machine plug O into the machine
socket (_.
3. Insert the power supply plug (_ into the outlet (_o
4. Turn the power switch O to turn on the power
and sewing light (_).
For Your Safety
_' While in operation, always keep your eye on the
sewing area. Do not touch any moving parts
such as the thread take-up lever, handwheel or
needle.
,4, Always turn off the power switch and unplug from
the power supply:
- When leaving the machine unattended.
- When attaching or removing any parts°
- When cleaning'the machine.
Do not place anything on the foot control, when
not sewing.
Operating instructions:
"For appliances with a polarized plug (one blade
wider than the other).
To reduce the risk of electric shock, this plug is
intended to fit in a polarized outlet only one way. If
it does not fit fully in the outlet, reverse the plug. If it
stiIl does not fit, contact a qualified electrician to
install the power outlet. Do not modify the plug in
any way_"
"Foot Controller Model YC-482J for use with
Sewing Machine Model 385.17628XXX,"
XXX - represents numbers 000 through 999,
Controlling Sewing Speed
Sewing speed can be varied by the foot control.
The harder you press on the foot control, the faster
the machine runs.