Foppapedretti Eureka Manual De Instrucciones página 23

Ocultar thumbs Ver también para Eureka:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
• ENGLISH •
USE
The hood is folded.
Close up the seat against the backrest (fig. 53).
Press button "A", (fig. 54) on the underneath of the right lever and keeping it pressed down, slide
both the left and right levers upwards (fig. 55). Close the stroller (fig. 56, 57, 58).
Check that closing lever "B" is engaged.
Seat oriented facing the parent (fig. from 59 to 67)
Notes: It is NOT possible to close the stroller with the accessories, car seat and carrycot attached
to the frame.
USE WITH ACCESSORIES
The EUREKA stroller can be used with the following accessories: the CLASSIC carrycot, the SMART
carrycot, the ACTION car seat and the Next i-Size car seat.
Remove the seat from the chassis (see the paragraph "Fitting the seat").
FITTING THE RIGHT AND LEFT ADAPTER
(fig.68, 69a/b)
Line up and insert the right and left adapter in the slots provided on the chassis of the pushchair.
Press until a click is heard indicating that the adapter has been secured correctly.
WARNING: Before use, always make sure that both the adapters have been secured correctly to the
chassis. When lifted they must not detach from the chassis.
REMOVING THE ADAPTERS (fig.70): press button "A" to remove the adapter.
USING THE INFANT CAR SEAT AND CARRYCOT TRAVEL SYSTEM ACCESSORIES
IMPORTANT: the travel system accessories must be secured to the chassis only in the parentfacing
position (fig. 71, 72).
Fitting the accessory (fig.73, 74, 75, 73): Line up the locking mechanism fitted on the accessory
with the adapters and press downwards until a click is heard indicating that the accessory has been
fastened correctly to the pushchair chassis complete with adapters. Make sure that the accessory
has been fastened correctly on both sides.
WARNING: Before use, always make sure that the accessory has been secured correctly. When the
accessory is lifted upwards it must not detach from the pushchair chassis.
Disassembly of CLASSIC carrycot accessory (fig. 77, 78): Grasp the carrycot handle and, pressing
release button "A" on one connector, slightly lift up the carrycot from the side of the unhooked
connector. Press button "A" on the opposite connector and lift up the accessory using the handle.
Disassembly of SMART carrycot accessory (fig. 79, 80): Grasp the carrycot handle and lift up
release lever "A" on the rear side. Remove the accessory by lifting it up using the handle.
Disassembly of ACTION car seat accessory (fig. 81, 82): Grasp the car seat handle and, pressing
release button "A" on one connector, slightly lift up the car seat from the side of the unhooked
connector. Press button "A" on the opposite connector and lift up the accessory using the handle.
23
Tabla de contenido
loading

Tabla de contenido