Hama RC 130 Instrucciones De Uso página 5

• To set the language for the day of the week
display, press and hold the q button (3) for
approx. 3 seconds. Press and hold the q button
(3) until the language you want is shown.
Note – Day of the week
You can choose German (GE), English (EN),
Swedish (SW), Dutch (DU), Italian (IT), Spanish
(SP) or French (FR) for the weekday display.
5.4. Alarm settings and display
• Press the mode button (4) repeatedly until AL1
is displayed.
• Hold the mode button (4) for approx. 3 seconds.
The hours display begins to ash.
• Press the p button (2) or the q button (3) to
select the hour for the alarm time and con rm your
selection by pressing the mode button (4). The
minutes display begins to ash.
• Repeat the process to set the minutes for the
alarm time. Once you have con rmed your minutes
selection with the mode button (4), alarm 1 is
activated and appears.
1
• You can also set a second alarm time.
• Press the mode button (4) repeatedly until AL2 is
displayed and repeat the settings for AL1.
• Press the button (6) to activate/deactivate
alarm time 1, alarm time 2 or both at once.
The alarm symbols
not appear.
• If the alarm is triggered, the corresponding alarm
symbol will begin to ash and an alarm will sound.
• Press the button (6) to stop the alarm.
Otherwise, it will stop automatically after 4
minutes.
4
and/or will appear/
1 2
• If you press the SNOOZE / LIGHT button (1)
during the alarm, the alarm is interrupted
for 4 minutes and then goes off again. The
corresponding alarm symbol and the snooze
symbol will ash.
Z
Z
5.5. Settings and display for a second time
zone
• Press and hold the p button (2) for approx. 3 se-
conds to display the second time zone as the main
time. The symbol appears next to the time.
F
• Press the mode button (4) repeatedly until the
temperature is displayed.
• Press and hold the mode button (4) for approx. 3
seconds to set a second time in another time zone.
The hours display begins to ash.
• Press the p button (2) or the q button (3) to
make the setting and con rm your selection by
pressing the mode button (4).
• To switch to the current local time, press and hold
the p button (2) again for approx. 3 seconds.
The symbol is no longer displayed.
F
5.6. Dual Time settings and display
• Press the mode button (4) repeatedly until DUAL
TIME is displayed.
• Press and hold the mode button (4) for
approximately 3 seconds. The hours display
begins to ash.
• Press the p button (2) or the q button (3) to
make the setting and con rm your selection by
pressing the mode button (4). The minutes display
begins to ash.
• Repeat the process to set the minutes.