LG LRFDS3006 Manual Del Propietário página 53

Ocultar thumbs Ver también para LRFDS3006:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Problem
Refrigerator or
Refrigerator was recently installed.
Freezer section is too
• It may take up to 24 hours for each compartment to reach the desired temperature.
warm.
The air vents are blocked. Cold air circulates from the freezer to the fresh food section
and back again through air vents in the wall dividing the two sections.
• Locate air vents by using your hand to sense airflow and move all packages that block
Doors are opened often or for long periods of time.
• When the doors are opened often or for long periods of time, warm, humid air enters the
Unit is installed in a hot location.
• The refrigerator should not be operated in temperatures above 110 °F (43 °C).
A large amount of food or hot food was added to either compartment.
• Adding food warms the compartment requiring the cooling system to run. Allowing hot
Doors are not closed correctly.
• See the "Doors will not close correctly or pop open" section in the Troubleshooting.
Temperature control is not set correctly.
• If the temperature is too warm, adjust the control one increment at a time and wait for the
Defrost cycle has recently completed.
• During the defrost cycle, the temperature of each compartment may rise slightly and
Refrigerator or
Incorrect temperature control settings.
Freezer section is too
• If the temperature is too cold, adjust the control one increment at a time and wait for the
cold.
Frost or ice crystals
Condensation from food with a high water content has frozen inside of the food
form on frozen food
package.
(inside of sealed
• This is normal for food items with a high water content.
package).
Food has been left in the freezer for a long period of time.
• Do not store food items with high water content in the freezer for a long period of time.
Frost or ice crystals
Door is opened frequently or for long periods of time.
form on frozen food
• When the doors are opened often or for long periods of time, warm, humid air enters the
(outside of package).
Door is not closing properly.
• Refer to the "Doors will not close correctly or pop open" section in the Troubleshooting.
vents and restrict airflow. Rearrange items to allow air to flow throughout the
compartment.
compartment. This raises the temperature and moisture level within the compartment. To
lessen the effect, reduce the frequency and duration of door openings.
food to cool to room temperature before putting it in the refrigerator will reduce this
effect.
temperature to stabilize.
condensation may form on the back wall. Wait 30 minutes and confirm the proper
temperature has been restored once the defrost cycle has completed.
temperature to stabilize. Refer to the Control Panel for more information.
compartment. This raises the temperature and moisture level within the compartment.
Increased moisture will lead to frost and condensation. To lessen the effect, reduce the
frequency and duration of door openings.
Possible Cause & Solution
TROUBLESHOOTING
53
Tabla de contenido
loading

Este manual también es adecuado para:

Lrfvs3006Lrfvc2406Lrfxc2406

Tabla de contenido