Tabla de contenido
Idiomas disponibles
Idiomas disponibles
15. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
Power tool use and care
16. Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
17. Do not use the power tool if the switch does
not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
18. Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such pre-
ventive safety measures reduce the risk of starting
the power tool accidentally.
19. Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
20. Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool's operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
21. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
22. Use the power tool, accessories and tool bits
etc. in accordance with these instructions, tak-
ing into account the working conditions and
the work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation.
Battery tool use and care
23. Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
24. Use power tools only with specifically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
25. When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery termi-
nals together may cause burns or a fire.
26. Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If con-
tact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause
irritation or burns.
Service
27. Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
28. Follow instruction for lubricating and chang-
ing accessories.
29. Keep handles dry, clean and free from oil and
grease.
CORDLESS SCREWDRIVER
SAFETY WARNINGS
1.
Hold power tool by insulated gripping sur-
faces, when performing an operation where
the fastener may contact hidden wiring.
Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
2.
Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
3.
Hold the tool firmly.
4.
Keep hands away from rotating parts.
5.
Do not touch the bit or the workpiece immedi-
ately after operation; they may be extremely
hot and could burn your skin.
Cordless Hazardous Location
Screwdriver
INSTRUCTION MANUAL
IMPORTANT SAFETY INSTRUCTIONS FOR
OPERATING THIS POWER TOOL IN HAZARDOUS
LOCATIONS
Underwriters Laboratories Inc (UL) listed for the following: UL
1604 Class I Division 2 Group A~D Hazardous (Classified)
Locations defined by National Electrical Code (NEC).
•
Class I Division 2 : where ignitable concentrations
of flammable gases, vapors or liquids are not likely
to exist under normal operating conditions.
•
Group A: atmosphere such as "acetylene" , gases
or vapor of equivalent hazard
•
Group B: atmosphere such as "hydrogen" , gases
or vapor of equivalent hazard
•
Group C: atmosphere such as "ethylene" , gases
or vapor of equivalent hazard
•
Group D: atmosphere such as "propane" , gases
or vapor of equivalent hazard
THIS EQUIPMENT IS SUITABLE FOR USE IN CLASS
I, DIVISION 2, GROUPS A, B, C AND D OR NON-
HAZARDOUS LOCATIONS ONLY.
DANGER: This tool should only be used
as a screwdriver. The use of this tool in any
other way may result in the ignition of a
flammable atmosphere.
WARNING: EXPLOSION HAZARD -
SUBSTITUTION OF COMPONENTS MAY
IMPAIR SUITABILITY FOR CLASS I,
DIVISION 2.
Battery Charger is not in compliance with
stated listings (UL1604).
The use of the battery charger in a
Hazardous Location may result in the igni-
tion of a flammable atmosphere and result
in serious injury to the user.
3 ENGLISH
Tabla de contenido
