2-Dog System - Petsafe SPT-275 Manual De Funcionamiento

STEP 4

2-Dog System

Note: If you wish to add another Receiver Collar to the training system, Add-A-Dog
Receiver Collars are available through our Customer Care Centre.
To Add Dog 2
Handheld Remote
1. Press the Spray Down Button (lower right - grey)
consecutively until "2d" appears on the Digital Display.
2. After the "2d" appears press the +2 Boost Button (red).
3. Set Dog 1 Spray Level to the desired level using the Spray Up
and Down Buttons.
4. Press the +2 Boost Button to lock the Stimulation Level for
Dog 1.
5. Set Dog 2 Spray level to the desired level using the Spray
Up and Down Buttons.
6. Press the +2 Boost Button to lock the Stimulation Level for
Dog 2.
Dog 2 Receiver Collar
1. With the Receiver Collar off your pet, turn the Receiver Collar off.
2. Press and hold the On/Off Button for 5 seconds.
3. The Receiver Collar will beep and the LED will flash.
4. On the Handheld Remote, press the Upper Right or Lower Right Button.
5. The Receiver Collar will respond and pair.
6. If the Receiver Collar does not respond, please contact the Customer Care Centre.
Handheld Remote Functions for Dog 2 Mode
Dog 1 Tone
Dog 1 Spray
Dog 1 +2 Boost
Dog 2 Tone
Dog 2 Spray
Dog 2 +2 Boost
Upper Left Button (Green)
Lower Left Button (Purple)
Press +2 Boost Button (Red) and the Lower Left Button (Grey)
simultaneously
Upper Right Button (Grey)
Lower Right Button (Grey)
Press +2 Boost Button (Red) and the Lower Right Button (Grey)
simultaneously
www.petsafe.net
Digital Display
Tone
Spray
Extra
®
Spray
Up
Spray
Down
+2 Boost
Charging Jack
(with cover)
15