Cooling Fluid Replacement - Benelli BN600R Manual Del Usuario

UK
Lubrication
The chain must only be lubricated at
an Authorised Benelli Workshop, at the
time intervals specifi ed in the Scheduled
Maintenance Table in this manual.
This operation must also be carried out
every time you ride the bike in rain and
after each wash.
Using the motorcycle with the chain in
bad condition and not lubricated may
cause accidents.
The chain must be correctly lubricated
to guarantee maximum effi ciency. Use
Petronas 6 in 1

COOLING FLUID REPLACEMENT

Since the cooling fl uid replacement may
be diffi cult for an operator with little ex-
perience, we recommend contacting an
authorised Benelli workshop.
IMPORTANT NOTICE:
This operation must only be carried out
by an Authorised Benelli workshop.
The cooling fl uid must only be topped up
when the engine is cool.
Never try to remove the cooling fl uid
tank cap while the engine is hot. Risk of
burns. The circuit is pressurized!
In certain conditions, the ethylene glycol
in the cooling fl uid may become fl amma-
ble and its fl ame is invisible.
Do not allow cooling fl uid to come into
contact with hot parts, as the combustion
of ethylene glycol may expose you to the
risk of burns.
Engine cooling fl uid is harmful if swal-
lowed, or if it comes into contact with
eyes or skin.
Keep the engine cooling fl uid out of
reach of children and pets.
In the event of swallowing cooling fl uid,
seek medical aid immediately; do not
provoke vomiting to avoid breathing the
product into the lungs.
In case of cooling fl uid in contact with
eyes or skinrinse immediately with plen-
ty of water.
102
BN600R