Preparing The Scale For Use; Selecting Installation Location; Installing The Pallet Scale - Mettler Toledo BSA231 Manual De Usuario

3
3.1
3.2
07/13 Order number 30096707A
UM_BSA231_236.indd 9

Preparing the Scale for Use

Selecting Installation Location

The correct location is crucial to the accuracy of the weighing
results.
Select a stable, vibration-free and, if possible, a hori-
•
zontal location for the weighing platform.
• The ground must be able to safely bear the weight of
the fully loaded weighing platform.
• Observe the following environmental conditions:
– No direct sunlight
– No strong drafts
– No excessive temperature fluctuations

Installing the Pallet Scale

• Place the pallet scale at the installation location. To
move the pallet scale you can lift it with the handle
and roll it on the transportation wheels.
• Check if a rocker-foot is installed in each of the 4
load cells. Do not apply torque to the load cells.
• Route the cable to the weighing terminal in such a
way that it is protected against damage.
For further steps refer to the weighing terminal user
•
manual.
1. Junction box 5. Load cell rocker-foot
2. Level bubble 6. Load cells
3. Signal cable 7. Platform
4. Weighing terminal 8. Wheels
Fig. 3-1 Major Components
User Manual BSA231/BSA236
METTLER TOLEDO
09.09.2013 12:14:18
9