Operating Instructions - Skil PWRCORE 12 RI574501 Manual Del Propietário

Operating Instructions

WARNING
fluid or allow a fluid to flow inside them.
certain industrial chemicals, and bleach or bleach-containing products, etc, can cause a short
circuit.
WARNING
result in serious personal injury.
WARNING
is misuse and could result in a hazardous condition leading to possible serious injury.
WARNING
bling parts.
This cordless right angle impact driver must be used only with the battery packs and chargers
listed below:
2Ah
SKIL BY500101
SKIL BY519901
NOTICE: Please refer to the battery pack and charger manuals for detailed operating
information.
To Attach/Detach Battery Pack
(Fig.2)
Lock the trigger switch "OFF" on the tool by
placing the direction-of-rotation (forward/cen-
ter-lock/reverse) selector in the center position.
To attach the battery pack:
Align the raised rib on the battery pack with the
grooves of the tool, and then slide the battery
pack onto the tool.
NOTICE: Make sure that the latch on the
battery pack snaps into place and that the
battery pack is secured to the tool before
beginning operation.
To detach the battery pack:
Depress the battery-release button, located on
the front of the battery pack, to release the battery pack. Pull the battery pack out and remove
it from the tool.
NOTICE: When placing the battery pack onto the tool, be sure that the raised rib on the
battery pack aligns with the groove inside the tool and that the latches snap into place
properly. Improper attachment of the battery pack can cause damage to internal components.
WARNING
be locked in the center position when the tool is not in use or carrying it at your side.
To reduce the risk of fire, personal injury, and product damage due to
a short circuit, never immerse your tool, battery pack, or charger in
If any parts are damaged or missing, do not operate this tool until the
parts are replaced. Use of this tool with damaged or missing parts could
Do not attempt to modify this tool or create accessories not
recommended for use with this tool. Any such alteration or modification
To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the tool when assem-
Battery Pack
4Ah
SKIL BY519801
Battery tools are always in operating condition. Therefore, the direc-
tion-of-rotation (forward/center-lock/reverse) selector should always
Corrosive or conductive fluids, such as seawater,
Fig. 2
Attach
Battery-Release Button
Charger
SKIL QC535701
SKIL SC536501
Detach
11