To Fill Fuel; Operation; To Adjust The Seat - Jonsered FR 2312 MA Manual De Usuario

Ocultar thumbs Ver también para FR 2312 MA:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

4. Put the lift lever for the cutting deck in operation
position.
5. Release the clip and remove the drive belt cover.
6. Disengage the spring for the drive belt to loosen the
drive belt tension.
Introduction
WARNING: Before you operate the product,
you must read and understand the safety
chapter.

To fill fuel

WARNING: Gasoline is very flammable. Be
careful and refuel outdoors (see
on page 9 ).
WARNING: Do not use the fuel tank as a
support area.
12
7. Remove the drive belt.
8. Hold the front edge of the cutting deck with two
hands and pull it out.
9. Lift the cutting deck and put it against the product or
a wall.

Operation

The engine runs on gasoline with a minimum octane
rating of 91 RON (87 AKI), not mixed with oil. We
recommend biodegradable alkylate gasoline. Do not use
gasoline that contains more than 10% ethanol.
Do a check of the fuel level before each use and
Fuel safety
refuel if necessary.
Do not fully fill the fuel tank. Keep a space of a
minimum 2.5 cm.

To adjust the seat

The seat can be tilted forward.
CAUTION: Incorrect type of fuel can result in
engine damage.
828 - 001 -
Tabla de contenido
loading

Este manual también es adecuado para:

Fr 2312 m

Tabla de contenido