Repairs; Cleaning; Inspection; Disposal - zarges Z600 Instrucciones De Montaje

7. Repairs

7.1 Cleaning

• Clean the product with a solution of water and a standard cleaning agent.
W
D
Dry standing surfaces and holding devices thoroughly after cleaning.

7.2 Inspection

• The product must be regularly inspected by a technical expert to ensure that it is
• The inspection intervals must be appropriate for the specific operating condi-

8. Disposal

ARNING
ANGER OF SLIPPING CAUSED BY WATER ON THE STANDING SURFACES
safe to operate. The technical expert is authorised to carry out inspection by the
operator and must have taken part in the seminars prescribed by law in the coun-
try concerned.
tions. Inspection must be carried out at least once a year.
> The inspection must be documented. Check sheets for inspection of the
product are available on the ZARGES homepage. After successful inspection,
attach the ZARGES inspection plate (Order No. 828384 or 828385) to the
product. The month and year in which the next inspection is due must be clearly
visible.
> The product is made mainly of aluminium. Dispose of the product components
as follows:
Aluminium: Recycling
Steel: Recycling
Plastic: Energy recovery (ladder feet, end caps, wheels)
!
21