Using The Device; Power Supply - eKuore Pro Serie Manual De Usuario

6. EMC COMPLIANCE AND ELECTRICAL SAFETY
6.1 Electromagnetic Compatibility
The eKuore Pro® Series may be affected by the use of certain devices such as electrosurgery, diathermy and electromagnetic equipment; defibrillators;
and mobile phones whose interference exceeds the limits set forth in standard EN60601-1-2.
6.2 Electromagnetic Emissions and Immunity
Emissions test
RF emissions CISPR 11
RF emissions CISPR 11
Harmonic emissions IEC 6100-3-2
Voltage fluctuations/ Flicker emissions IEC 61000-3-3

6.3 Using the device

The use of accessories that have not been supplied by us may result in non-compliance with the safety levels of the eKuore Pro® Series, reducing the
safety level, increasing the level of emissions, and reducing immunity. The manufacturer has foreseen most of the possible faults of the device, which
have been included in the internal monitoring system. However, if the patient depends on this system, it is recommended to have an alternative system.
The user must read and understand this manual before using any device in the eKuore Pro® Series. This manual has been written to provide the
necessary information for the use of any device in the eKuore Pro® Series, but should not be considered a substitute for medical instructions essential
for the adjustment of the eKuore Pro® Series to adapt it to the needs of the patient.

6.4 Power supply

Since the device has an internal battery, it is recommended to charge it regularly. If it is not used frequently, charge the battery to 50% before storing to
keep it in good condition. No more than six months should elapse between charges.
The energy supply of the stethoscope eKuore Pro® / eKuore Pro® amplified is provided a lithium polymer rechargeable Lithium by a microUSB
connector. USB to microUSB connector is included in the pack. The supply voltage of the device is 5Vcc.
Compliance Electromagnetic Environment - Guide
Group 1 The eKuore Pro® Series only utilises RF energy for its internal
function. Therefore, their Rf emissions are very low and are not
likely to cause any interference to nearby electronic equipment
Class B The eKuore Pro® Series is suitable for use in all establishments
including domestic establishments and those directly connected to
Non applicable
the public low-voltage power supply network that powers buildings
used for domestic purposes.
Non applicable
22
EN
[English]