Booster Mode - Britax GROW WITH YOU CLICKTIGHT Guia Del Usuario

Britax Child Safety, Inc.

Booster Mode

Only use a lap-shoulder belt to secure the child in booster
mode�
Use the shoulder belt guides on the child seat to ensure
proper fit�
Ensure the lap part of the vehicle belt sits low across the
child's upper thighs and that the shoulder part does not
contact the child's neck�
Before you begin:
• If your vehicle seat back is adjustable, ensure it is in
the upright position before placing the child seat on
the vehicle seat�
• Adjust the child seat to the upright position and place
forward facing on the vehicle seat, if not already
installed (see page 8)�
1� Adjust the head restraint
so the bottom of the
shoulder belt guides are
in the closest position
at or above the child's
shoulders� The child's ears
should be below the top of
the head restraint�
2� Pull the vehicle belt out
and route the shoulder part
through the shoulder belt
guide�
NOTE: Raising the head
restraint to the highest
position will allow for
easier access to the
shoulder belt guide.
3� Fasten the vehicle belt
across the child�
NOTE: The lap part of the
vehicle belt must be routed
low across the child's
upper thighs.
NOTE: Ensure that the
belt passes under armrest
along belt guide on buckle
side.
20
WARNING!