Securing Your Child; Harness Mode - Britax GROW WITH YOU CLICKTIGHT Guia Del Usuario

Britax Child Safety, Inc.

Securing Your Child

Harness Mode

Never route the vehicle belt over the child when using this
child seat in harness mode�
Adjust the belts provided with this child seat so they fit
snugly around your child� A snug strap should not allow
any slack� It lies in a relatively straight line without sagging�
It does not press on the child's flesh or push the child's
body into an unnatural position�
Adjust the harness to fit the clothes the child is wearing�
Remove bulky coats and/or jackets before putting the
child in the child seat�
Verify that the child seat is secure and the harness is
properly adjusted around the child each time the child seat
is used�
Before you begin:
Always check the seat area for debris and remove
it to prevent interference with the harness adjuster
mechanism or CLICKTIGHT�
1� Loosen the harness�
a� Press the release lever�
b� Pull both harness
straps forward�
2� Open the chest clip�
a� Press tabs�
b� Pull apart�
3� Release the buckle and
place the harness straps
around the armrests�
18
WARNING!
b
a