Installation In Booster Mode - Britax GROW WITH YOU CLICKTIGHT Guia Del Usuario

5. Firmly press the tether hook
over a designated vehicle
tether anchor. Remove
slack.
6. Secure excess webbing
with the elastic strap.
Lap Belt with CLICKTIGHT
9 All connections are secure and vehicle belt is not twisted.
9 Vehicle belt is locked as directed by your vehicle owner's
manual.
9 Child restraint cannot be moved front to back or side to
side more than 1 in. (2.5 cm) at the belt path. If the child
restraint is not secure, repeat the installation or use a
different seating location.
9 Excess top tether webbing is contained within your vehicle
and secured.

Installation in Booster Mode

LATCH with CLICKTIGHT
Before you begin:
IMPORTANT:
tether to position this child restraint in booster mode. To
use this seat in booster mode without lower anchors, see
instructions for Securing Your Child on page 17.
IMPORTANT:
seat to the vehicle seat even when unoccupied, since in
a crash an unsecured child restraint system may injure
occupants. Secure your child using the vehicle's lap-
shoulder belt system.
• Check that your vehicle has lower anchors.
• Check that your vehicle has a top tether anchor. Do not use top
tether without securing lower connectors.
GROW WITH YOU CLICKTIGHT / PLUS User Guide
It is not necessary to use lower anchors or
Use lower anchors to secure the child
Table of Contents
Or
Or
15