Maintenance And Storage; What If There Are Problems; Technical Data - Beurer MG 520 To Go Instrucciones De Uso

8. Maintenance and storage

Cleaning
WARNING
• Always unplug the mains part from the socket and disconnect it from the device before carrying
out any cleaning.
• Clean the device using only the methods specified. Under no circumstances may liquid enter the
device or the accessory.
• Small marks can be removed using a cloth or damp sponge, and some liquid delicate laundry
detergent where necessary. Do not use any solvent-based cleaning products.
• Do not use the device again until it is completely dry.
Storage
If you do not plan to use the device for a long period of time, we recommend that you store it in the original
packing in a dry environment, ensuring it is not weighed down by additional items.

9. What if there are problems?

Problem
Massage heads rotat-
ing too slowly.
Massage heads do
not move.
The widths cannot be
adjusted.

10. Technical data

Supply
Dimensions
Weight
Battery:
Capacity
Nominal voltage
Type designation
Cause
The load on the massage
heads is too great.
Device is not connected
to the mains or battery
power is too low.
Rotary knob for adjusting
the width is not pushed
down.
100-240 V ~; 50/60 Hz; 1.4 A
42 x 23,5 x 14 cm
approx. 2,25 kg
1800 mAh
11.1 V
Lithium-ion
Solution
Free up massage heads.
Charge the device.
Push and hold the dial downwards and adjust the
distance between the massage heads by turning it
left or right.
16