DeWalt DXAEJ14 Manual De Instrucciones página 21

Puente auxiliar de arranque con compresor digital y puertos usb 3.1a
Ocultar thumbs Ver también para DXAEJ14:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Problem
Unit fails to jump-start
(continued)
Portable Compressor
will not inflate
USB Port will not
power appliance
DXAEJ14_ManualENSP_101216.indd 21
Possible Solution
Check that the unit has a full charge.
Recharge the unit if necessary.
Make sure the Compressor Power
Button has been pressed to turn the
compressor on.
Make sure the unit is not being
operated in the Jump Starter mode.
Make sure the SureFit
nozzle is
®
securely screwed on to the valve stem
when attempting to inflate tires; or that
the nozzle adapter is securely screwed
into the SureFit
®
nozzle and is inserted
properly into the item to be inflated on
all other inflatables.
Check that the unit has a full charge.
Recharge the unit if necessary.
Make sure the USB Power Button is in
the on position.
Make sure all the USB Power/Fault
Indicators light solid blue. If a fault
condition exists in either of the USB
Ports, the USB Power/Fault Indicators
will flash blue. Refer to the Important
Notes in the "USB Ports" section to
remedy any faults.
Problem
USB Port will not
power appliance
(continued)
LED Area Light does
not come on
Accessories
WARNING: Since accessories, other than those offered by
D
WALT, have not been tested with this product, use of such
e
accessories with this unit could be hazardous. To reduce the risk of
injury, only D
WALT recommended accessories should be used with
e
this product.
If you need assistance regarding accessories, please contact the
manufacturer at 1-888-394-3392 or CustomerService@dewalt12volt.
com.
21
Possible Solution
Make sure that the total draw of all USB
devices plugged into the USB Ports
does not exceed 3.1A.
Some USB-powered household
electronics will not operate with this
USB charging/power port. Check the
manual of the corresponding electronic
device to confirm that it can be used
with this type of USB charging/power
port.
Check that the unit has a full charge.
Recharge the unit if necessary.
Make sure the Area Light Power Button
is in the on position
Check that the unit has a full charge.
Recharge the unit if necessary.
10/19/2016 3:54:16 PM

Hide quick links:

Tabla de contenido
loading

Tabla de contenido