Product Components - Hoover Freejet Manual De Instrucciones

PRODUCT COMPONeNTS

Main Cleaner
A. Main Body
B. Push and Go Release Button
C. Handheld Cleaning Unit
D. Nozzle Release Button
E. Parking Lock
F. Nozzle Mode Selector
PRePARING YOU CLeANeR
1. Assembly the handle by pushing it onto the main body until it locks in place [1].
2. Assembly the nozzle onto the neck of the main body. It will lock in place to remove
press the nozzle release button (D) and pull it from the main body [2].
3. Assembly the handheld cleaning unit to the main body [3].
4. Insert charger to handheld cleaning unit. For first use charge your cleaner
for 24 Hrs [4]. After first use the normal charging time is 16 Hrs.
5. Fix the Product Holder to your wall using the screw and holder provided [R]. During storage and
charging, secure your appliance handle into the product holder.
NOTe: Use only the charger supplied with your cleaner to recharge.
IMPORTANT: When charging the cleaner the On/Off switch must be OFF.
Keep the charger plugged into the socket at all times. It is normal for the charger to become warm to the
touch when charging.
If the operating times reduces after repeated use let the cleaner run until it stops then recharge for 24
hours, repeat this monthly for best results.
USING YOUR CLeANeR
1. Prepare your cleaner for use by releasing the parking lock on the nozzle [5].
2. Turn on your cleaner by pressing the On/Off switch on the handheld cleaning unit (J).
3. Use the nozzle mode selector to change between carpet and hard floor mode [6].
4. To use as a handheld cleaner press the "Push and Go" button to remove the handheld cleaning unit
from the main body [7].
5. The supplied accessories can be used in handheld mode [8].
CLeANeR MAINTeNANCe
emptying the Dust Container
Hold the handheld cleaning unit over a bin and pull the bin empty trigger to empty the dust container [9].
Cleaning the Filters
1. Remove the handheld cleaning unit from the main body [7].
2. Press the bin release button and remove the dust container [10].
3. Remove the filter and shroud from the dust container [11].
4. Wash the filter and shroud in lukewarm water. Once thoroughly dry return them to the dust container.
NOTe: Do not use hot water or detergents when cleaning the filters. In the unlikely event of the filters
becoming damaged, fit a genuine HOOVER replacement. Do not try and use the product without a filter fitted.
* Features vary according to model
Handheld cleaner
G. Dust Container
H. Bin Release Button
I. Charge Socket
J. On/Off Switch
K. Bin Release Button
9
Filters Accessories
L. Shroud N. Charger
M. Filter* O. Dusting Brush
P. Crevice Tool
Q. Rigid Extension Tube*
R. Product Holder
GB