Safety Instructions - Maytag EPIC z Manual De Uso Y Cuidado

ADD A GARMENT
aREWASH
WASH
RINSE
SPIN
CLEAN
CONTROLS LOCKED ;_j
DOOR LOCKED
POWER
@
RAPID
EX HOT/COLD
START i/i MEDIUM i/i WARM/WARM
PAUSE/
CANCEL LOW WAtM/COLD
Q NO SPIN COLD/COLD
© ©
SPIN WASH/RINSE
SPEED TEMP
CO_OL
NOTE: [he panel shown above may be different from that of your model.
Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil on
it (including cooking oils).
Doing so can result in death, explosion, or fire.
WARNING: ]b reduce the risk of fire, electric shock, or injury to persons, read the
IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
]he following is a guide to using your washer. Please refer to specific sections of this manual
for more detailed information.
Do not store laundry products on the top surface of this washer. Vibration is normal during
operation.
O PREWASH
O MAX EXTRACT
O STAIN CYCLE
i EXTRA RINSE
Use only High Efficiency detergents. The package for this type of detergent will be marked
"HE" or "High Efficiency." This wash system, along with less water, will create too much
sudsing with a legulal non-HE detelgenL Using legulal detelgen[ will likely result in washel
errors, longer cycle times, and reduced rinsing performance. It may also result in component
failures and noticeable mold or mildew. HE detergents are made to produce the right amount
of suds for the best performance. Follow the manufacturer's instructions to determine the
amount of detergent to use.
Use only HE High Efficiency detergent.
First Wash Cycle Without Laundry
Before washing clothes for the first time, if not completed during the final installation step,
choose the Normal cycle and run it without clothes. Use only HE High Efficiency detergent.
Use _/_the manufacturer's recommended amount for a medium-size load. This initial cycle
serves to ensure the interior is clean before washing clothes.
14.