Cleaning The Metal Mesh Grease Filters; Installing The Metal Mesh Grease Filter; Changing The Activated Charcoal Filter (Only In Circulating-Air Mode); Removing Metal Grease Filter - Bosch DHI625R Instrucciones De Uso

Area Cleaning agent
Controls Hot soapy water:
Clean using a damp dish cloth and dry
with a soft cloth/towel.
Risk of electric shock caused by pene-
trating moisture.
Risk of damage to the electronics from
penetrating moisture. Never clean
operating controls with a wet cloth.
Do not use any stainless steel cleaners.

Cleaning the metal mesh grease filters

These instructions apply to several appliance variants. It is
possible that individual features are described which do not
apply to your appliance.
:
Risk of fire!
Grease deposits in the grease filter may catch fire.
Clean the grease filter at least every 2 months.
Never operate the appliance without the grease filter.
Notes
Do not use any aggressive, acidic or alkaline cleaning
■
agents.
When cleaning the metal mesh grease filters, also clean the
■
holder for the metal mesh grease filters in the appliance
using a damp cloth.
The metal mesh grease filters can be cleaned in the
■
dishwasher or by hand.
By hand:
Note: You can use a special grease solvent for stubborn dirt. It
can be ordered via the Online Shop.
Soak the metal mesh grease filters in a hot soapy solution.
■
Clean the filters with a brush and then rinse them thoroughly.
■
Leave the metal mesh grease filters to drain.
■
In the dishwasher:
Note: If the metal mesh grease filters are cleaned in the
dishwasher, slight discolouration may occur. This has no effect
on the function of the metal mesh grease filters.
Do not clean heavily soiled metal mesh grease filters together
■
with utensils.
Place the metal mesh grease filters loosely in the dishwasher.
■
The metal mesh grease filters must not be wedged in.

Removing metal grease filter

Open the lock and fold down the metal grease filter. In doing
1.
so, place other hand under the metal grease filter.
Take the metal grease filter out of the holder.
2.
Note: Grease can accumulate in the bottom of the metal
grease filter. Hold the metal grease filter level, otherwise
grease will drip out.
14
Clean the metal grease filter.
3.
After removing the filters, clean the inside of the appliance.
4.

Installing the metal mesh grease filter

Insert the metal mesh grease filter.
1.
While doing this, place the other hand under the metal mesh
grease filter.
Fold the metal mesh grease filter upwards, locking it in place.
2.
Changing the activated charcoal filter (only in
circulating-air mode)
In order to guarantee efficient odour filtration, the filter must be
serviced regularly.
The activated charcoal filters must be replaced at least every
4 months.
Notes
The activated charcoal filters are not included in the delivery.
■
The activated charcoal filters can be obtained from specialist
retailers, from our after-sales service or from the Online Shop.
The activated charcoal filters cannot be cleaned or
■
reactivated.
For removing the metal grease filter, see above.
1.
Withdraw the old activated charcoal filters from the holder.
2.
Press the new activated charcoal filters onto the holder until
3.
they can be heard to lock in place.
For fitting the metal grease filter, see above.
4.