Installing A Wru-801A Tuner Unit - Sony WRR-801A Manual De Instrucciones

Installing a WRU-801A Tuner Unit

Up to five WRU-801A UHF Synthesized Tuner Units
can be installed.
Notes
• Be sure to power this unit off before installing the
WRU-801A.
• The buttons and display on the front panel of the
WRU-801A may be damaged if they are gripped too
strongly. Always hold the WRU-801A by the side.
• Do not touch the connectors on the rear panel of the
WRU-801A.
• Be careful of static electricity.
Installing a WRU-801A
1
2
1
Power the tuner off and remove the blank panel
with a screwdriver or other tool.
2
Hold the WRU-801A by the side and insert into
the slot. Push in until you hear a click.
Removing a WRU-801A
On the bottom panel of the tuner, locate the lever
corresponding to the slot where the WRU-801A is
installed and pull the lever forward. The WRU-801A is
ejected from the slot.
Bottom Panel
Lever
9