Automatic Search And Setting Of Available Channels - Sony WRR-801A Manual De Instrucciones

Channel Setting
Automatic Search and Setting of
Available Channels
When you use the tuner in a multi-channel operation
system, you can assign available channels to all tuner
units by operating the first tuner unit only.
1
Power off all wireless microphones and
transmitters.
2
On the first tuner unit, select the group to be used.
3
Press the SET button on the first tuner unit and
hold it down for 3 seconds.
The first tuner unit searches for available channels
in the selected group, and available channels in the
group are so assigned to all tuner units
automatically that two or more tuner units may not
use the same channel.
After automatic setting, you can adjust the groups
and channels of individual tuner units.
Notes
• Do not use group 00.
• If no channels are available, "NO CH" is displayed
and channel setting is aborted.
12
When using two tuners
When you use two tuners, proceed as follows to ensure
that the two tuners do not use the same channel
settings.
1
Follow the procedure explained above to set the
group and channel of the first tuner.
2
Power on the wireless microphones or transmitters
after adjusting them to the channels of each tuner
unit.
Note
If the microphones or transmitters are not powered
on, the two tuners may use the same channel twice.
3
On the first tuner unit of the second tuner, set the
same group as selected on the first tuner.
4
Press the SET button of the first tuner unit on the
second tuner and hold it down for 3 seconds.
Available channels in the same group (channels
not used by the first tuner) are automatically set on
the first tuner unit and the other tuner units on the
second tuner.
Note
If automatic channel setting does not function well for
the 2nd tuner (due to poor reception), set channels
manually for the 2nd tuner.