MTD A00 Serie Manual Del Usuario página 11

Ocultar thumbs Ver también para A00 Serie:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

2_
b.
Slip plastic channel
of grass bag over hooks on the
frame. See Fig. 3-7.
Figure 3-7
Follow steps below to attach grass catcher:
a.
Lift rear discharge
door.
b.
Place grass catcher into the slots in the handle
brackets as shown
in Fig. 3-8. Let go of discharge
door so that it rests on the grass catcher.
_---s---_J
t
®
i,
f
Side Discharge Chute (if Equipped)
Your mower
may be shipped
as a mulcher. To convert to side
discharge,
make sure grass catcher (if equipped)
is off of the unit
and rear discharge
door (if equipped)
is closed.
On the side of the mower, lift the side mulching
plug. See
Figure 3-9.
2_
Figure
3-9
Slide two hooks of side discharge
chute under hinge pin on
mulching
plug assembly.
Lower the mulching
plug. Do not
remove
side mulching
plug at any time, even when you are
not mulching.
Figure 3-8
To remove
grass catcher, lift rear discharge
door on the mower.
Lift grass catcher up and of the slots in the handle brackets.
Release rear discharge
door to allow it to close rear opening
of
mower.
SECTION 3 -- ASSEMBLY & SET-UP
11
Tabla de contenido
loading

Este manual también es adecuado para:

A10 serieA20 serieB00 serieB10 serieB20 serie

Tabla de contenido