General Rules - S&P TURBO - 451 CN Manual De Uso Y Mantenimiento

GENERAL
- We are grateful for the trust you have placed in
manufactured in line with technical safety regulations, in accordance with EC standards.
- Before installing and starting up this product, carefully read the present instructions, as they contain
important indications for your safety and to protect users during the installation, use and maintenance of
the device. Keep it in a safe place for later use.
- Please check the perfect state of the device when unpacking, since all defects of origin are covered by
S&P
the warranty. Likewise, check that the device is as you requested, and that the data on the data plate
coincide with your requirements.
SAFETY REGULATIONS AND "EC" MARKING
S&P
- technicians are firmly committed to evermore efficient product research and development, always
in line with current safety regulations.
- The rules and recommendations indicated below comply fully with current regulations on safety, based
principally on the fulfilment of regulations of a general nature.We therefore recommend that all people
exposed to risk should strictly adhere to accident prevention regulations in force in their country.
S&P
- shall be exempt from any liability resulting from damage caused to persons or property as deriving
from failure to comply with the safety regulations or from any possible modifications of the product.
EC Marking
- The
European Community standards.

GENERAL RULES

- This manual contains information for all persons exposed, in order to prevent any possible harm or
damage to persons or things as a result of defective handling or maintenance.
- All maintenance interventions (both ordinary and non-scheduled) must be carried out with the machine
halted and disconnected from the electricity grid.
- Before connecting the electricity supply cable, check that the voltage values and power supply grid
frequency correspond to that shown on the data plate.
- If the power supply cable is damaged, it should be replaced by the manufacturer, by its after sales service
or by similarly qualified staff, in order to prevent any danger.
- In the event of incorrect operation, immediately halt the device, disconnect it from the electrical supply
and call out the Technical Assistance Service.
- In order to clarify any doubts with regards to
Spain, or your usual supplier for the rest of the world. You can check their location at the website:
www.solerpalau.com
and corresponding declaration of conformity certify conformity with applicable
S&P
by buying this product, which has been
S&P
products, contact the After-Sales Services Network if in
11