Electrical Connection; General Parameters - S&P CTBH ECOWATT Manual De Instrucciones

ELECTRICAL CONNECTION

- Check that the on/off isolator switch is on position "0"
- Open the front cover of the control box and connect the main supply 230V 50/60Hz to the terminal J1
- The remote control used to adjust and display parameters is supply with a 1 meter length cable.
- First connect this cable to the remote control PROSYS CTBH and then to the outlet J9, placed on the PCB of the
control box.
- Close the front cover of the control box
DESCRIPTION
The control box fitted on the fan is ready to operate in constant airflow.
The factory setting must be adjusted at the specificities of the site.
On the remote control: (accessory sold separately)
- The key and
- The keys and

GENERAL PARAMETERS

- Put the on/off isolator switch in position "1"
- The remote control display shows:
LANGUAGE
ENGLISH
To modify the language press the keys
To confirm press the key
Once the language has been selected, the remote control display shows the present fan conditions:
Q:xxxm /h T: XXºC
3
Qc: xxxm3/h
are mainly used to move in the different parameter and confirm the selection
, are mainly used to change the adjusted values
OK
and
(OK):
Tc:XXºC
.
Q:
Airflow in m3/h
Qc:
Preset airflow in m3/h
T :
Temperature read on the fan in ºC
Tc::
Set temperature in ºC
ON
ERROR
(Sold as an accessory)