Data Management; Sample Id; Menu Structure Of Data Menu; Measurement Data - Mettler Toledo SevenGo Duo pro SG68 Instrucciones De Manejo

7 Data management

7.1 Menu structure of data menu

1.
2.

7.2 Measurement data

1. Review
All
All stored measurement data can be reviewed; the most recent data saved appears on the display.
Press Trans to send the measurement data (current single set) over the IR interface to the printer or PC.
Partial
The measurement data can be filtered according to 3 criteria.
●
Memory number (MXXX)
●

Sample ID

●
Measurement mode
Memory number
a) Enter the memory number of the data and press Review.
The measurement data is displayed.
b) Press Trans to send the measurement data (current single set) over the IR interface to the printer or
PC.
Sample ID
a) Enter the sample ID and press Review.
The meter finds all stored measurements with this sample ID.
b) Scroll through the measurement data to review all measurements with the entered sample ID.
c) Press Trans to send the measurement data (current single set) over the IR interface to the printer or
PC.
Measurement mode
a) Select a measurement mode from list and press Review. The meter finds all stored measurements of
the selected measurement mode.
b) Scroll through the measurement data of the selected measurement mode.
c) Press Trans to send the measurement data (current single set) over the IR interface to the printer or
PC.
pH/ORP/Ion/DO meter SG68
Measurement Data
1. Review
2. Transfer
3. Delete
Calibration Data
1. pH
1. Review
2. Transfer
3. Delete
2. Ion
1. Review
2. Transfer
3. Delete
Continue at top of table
Data management
3. DO
1. Review
2. Transfer
3. Delete
3. ISM Data
1. pH
1. Initial Calibration Data
2. Calibration History
3. Maximum Temperature
4. Reset ISM
2. DO
1. Initial Calibration Data
2. Calibration History
3. Maximum Temperature
4. Oxygen Membrane
5. Reset ISM
27