Operation Of Lagd 1000/Ac; Lagd 1000/Ac - SKF LAGD 1000 Serie Instrucciones De Uso

4. Operation of LAGD 1000/AC.. and LAGD 1000/DC.. units
4.1 LAGD 1000/AC.. & LAGD 1000/DC.. display and control unit
A transparent plastic cover, to protect against water splashes and mechanical damage,
protects the display and control unit. To program or to display the current functions,
the cover has to be removed using a screwdriver. Replace the cover after use to protect
the unit.
Led display
PAUSE
h/lmp
CONTACT
min/lmp
CS
PS
FAULT
20

LAGD 1000/AC..

LAGD 1000/DC..
• Seven-segment display: Values and operating state
• Pause time
• Pump operation
• CMonitoring of system function by means of an external
cycle switch CS = Cycle Switch
• NOT USED FOR LAGD 1000. This LED must not light
• Fault message
Push buttons
• Turn on display
• Display values and parameters
• Call up the last parameter in the programming mode
• Set values and parameters
• Change between programming and display mode
• Confirm values
• Activate intermediate lubrication
• Clear fault message
SKF LAGD 1000