Machine Features; Intended Use; Operation; Initial Operation - Festool CTL 48 E LE EC/B22 R1 Manual De Instrucciones

English
Mobile dust extractors
ATEX marking
EC-type examination certificate number
* Appliance socket only with EU/ROK variant
(220-240V)
4

Machine features

[1-1]
Sealing plug
[1-2] Intake opening
[1-3] Compressed air connection
[1-4] Connection for energy box
[1-5] Handle
[1-6]
SysDoc
[1-7] Handle SB-CT (accessory)
[1-8]
Hose diameter setting
[1-9] Switch
[1-10] Suction power adjuster
[1-11] Appliance
on/off function
[1-12] Locking clip
[1-13] Dust container
[1-15] Brake
5

Intended use

The mobile dust extractor is designed for ex­
tracting dry, flammable dust from machines
and equipment in zone 22.
CTM 48 E LE EC/B22 R1The mobile dust extrac­
tor is designed for extracting hazardous dusts
with limit values up to 0.1 mg/m³ and wood dust
from dust class 'M' in accordance with IEC
60335-2-69.
The tool is designed to be used by professional,
commercial users.
CTL 48 E LE EC/B22 R1: The mobile dust ex­
tractor is designed for extracting hazardous
dust with limit values up to 1 mg/m³ from dust
class 'L' in accordance with IEC 60335-2-69.
The mobile dust extractor is designed to extract
water
as well as for heavy-duty applications and in­
dustrial use in accordance with IEC 60335-1
and IEC 60335-2-69.
16
socket with automatic
II 3D Ex tc IIIC T135 °C Dc ‑5 °C ≤ Ta ≤ 40 °C
The tool is designed to be used by professional,
commercial users.
The mobile dust extractor is not suitable for ex­
tracting dust that poses a high risk of explosion
(e.g. explosives), flammable dust with an igni­
tion energy of less than 1 mJ (labour authori­
ties), flammable liquids and mixtures of com­
bustible dust and flammable liquids.
The mobile dust extractor is not suitable for
equipment that generates sources of ignition.
The user is liable for improper or non-in­
tended use.
6

Operation

WARNING
Unauthorised voltage or frequency!
Risk of accident
► The mains voltage and the frequency of the
power source must correspond with the
specifications on the machine's name
plate.
► In North America, only Festool machines
with the voltage specifications 120 V/60 Hz
may be used.
6.1

Initial operation

► Open the locking clips [2-2] and remove the
top section of the machine [2-1].
► Remove the accessories from the dust con­
tainer [2-3] and the packaging!
► Insert a filter bag in the dust container that
fulfils statutory requirements (see chapter
7.8 ).
► Replace the top section [2-1] and close the
locking clips [2-2].
► Attach the cable holder to the rear of the
mobile dust extractor (see Fig. [3]).
► Insert the sealing plug [1-1] on the panel
(see Fig. [1] ).
► Connect suction hose at the extractor open­
ing [1-2].
6.2

Switch on/off

► Insert the plug into an earthed socket.
IBExU15ATEXB004