Safety Instructions For Moving The Platform Ladder; Dismantling, Storage And Transport; Dismantling; Storage - zarges Z600 Instrucciones De Montaje

5.2 Safety instruc-
tions for
moving the
platform
ladder

6. Dismantling, storage and transport

6.1 Dismantling

6.2 Storage

6.3 Transportation • Fold the product and pack it for transport.
20
> Do not use the product directly adjacent to unsecured doors and windows.
However, emergency exits must not be locked.
> Do not use the product on slippery surfaces (e.g. moisture, ice, snow or soiling).
> Do not attach advertising placards or objects which could increase the wind
load.
> In the event of high winds, evacuate the platform ladder, move it to a wind-shel-
tered position with the help of several other persons and take appropriate
measures to secure it against toppling over (e.g. fit anchors).
> When using the product in buildings open to the passage of wind, on unclad
buildings or building corners, observe wind speeds and, if necessary, take
appropriate measures to prevent the product toppling over (e.g. fit anchors).
> After finishing work, move the product to a wind-sheltered position and, if
necessary, take additional measures to secure it against toppling over (e.g. fit
anchors).
> Secure the rollers with the locking mechanism to prevent the product rolling
away.
Tilt the product slightly if you are moving it when it is unfolded.
W
ARNING
D
ANGER OF SERIOUS OR EVEN FATAL INJURY IF THE PRODUCT TOPPLES OVER WHILE MOVING IT
Follow these basic rules to prevent dangerous situations arising:
> Do not move the product as long as there are persons, material or tools on the
platform.
> Always move the product to its new location slowly and by hand. Never use tow-
ing trucks or forklifts to move it. Avoid collisions.
> Only move the product in longitudinal or diagonal direction and on a level, firm
and unobstructed surface.
• If necessary, use lifting tackle to lay the product on its side. Do not lift the product
by the guardrails or braces. Attach lifting tackle to the body of the access steps
or the platform.
• Store components in a location where they are protected from the elements, and
if possible, store them laid flat.
• Use straps to secure components against sliding or falling during transport.
• Do not throw components during loading or unloading.
!