Orbegozo MIG 2527 Manual De Instrucciones página 40

MIG 2527
Operation Instructions
.
1. Clock Setting
When the microwave oven is electrified, the LED will display "0:00", buzzer will ring once.
1) Press " Clock/ Kitchen Timer " once to select clock function, the hour figures will
flash.
2) Turn "
3) Press " Clock/ Kitchen Timer", the minute figures will flash.
4) Turn "
5) Press " Clock/ Kitchen Timer" to finish clock setting. ":" will flash, and the time will
light.
Note: 1) If the clock is not set, it would not function when powered.
2) During the process of clock setting, if you press " Stop/Clear", the oven
will go back to the previous status automatically.
2. Microwave Cooking
Press" Microwave./Grill/Combi." the LED will display "P100".Press
" Microwave./Grill/Combi."for times or turn "
"P100", "P80" "P50", "P30" or "P10" will display for each added press. Then press
" Start/+30Sec./Confirm" to confirm, and turn "
95:00. Press " " again to start cooking.
Example: If you want to use 80% microwave power to cook for 20 minutes, you can
operate the oven as the following steps.
1. Press "Microwave./Grill/Combi. " once, the screen display "P100".
2. Press " Microwave./Grill/Combi. " once again or turn" " to choose 80%
microwave power.
3. Press " Start/+30Sec./Confirm " to confirm, and the screen displays "P 80".
4. Turn "
5. Press " Start/+30Sec./Confirm" to start cooking .
Note: the step quantities for the adjustment time of the coding switch are as
follow:
" to adjust the hour figures, the input time should be within 0--23.
" to adjust the minute figures, the input time should be within 0--59.
" to adjust the cooking time until the oven displays "20:00".
0---1 min : 5 seconds
1---5 min : 10 seconds
" to choose the power you want, and
" to set cooking time from 0:05 to
40