melitta PASSIONE Manual De Instrucciones página 92

Care and maintenance
Fig. 18: Screwing/Unscrewing the water lter
The water lter (33) is screwed in and unscrewed from the thread (34) on
the base of the water tank (1) using the screwing aid (32).
Information
The water lter should not be left standing dry for a long period of time.
When it is not used for a long time, we recommend storing the water lter
in a vessel lled with tap water in the refrigerator.
Inserting the water lter
Information
The water hardness cannot be set if you use a water lter. The water
hardness is automatically set to soft (see section 6.4 Setting the water
hardness on page 78).
Place the water lter into a vessel lled with fresh tap water for a few
minutes before inserting it.
92
32
33
1
34