Idiomas disponibles
Idiomas disponibles
4.
Press the PWR button approx. every 2 seconds.
5.
When the TV switches itself off, briefly press the
device button (TV*)) to store the code found.
6.
The lamp goes out and the search is ended.
7.
Try out the functions. If everything is okay, you
can set the remote control as described in steps
1 to 6 for other devices. Then press the device
buttons SAT*), DVD*) or VCR*) instead of TV*).
If it is not okay, continue searching as described
in 1 to 6.
Automatic code search
To control a TV:
1.
Switch on a program on your TV (on the TV
itself or with the original remote control).
2.
Press the device button with which you want to
control a device, e.g. TV*).
3.
Then press the SET button for approx. 5
seconds until the red lamp comes on.
4.
Release the SET button and point the UR
44+4at the device to be controlled. The UR 44+4
then begins to emit a test signal about every 2
seconds.
5.
When the TV switches itself off, briefly press the
SET button to store the code found.
6.
The lamp goes out and the search is ended.
7.
Try out the functions. If everything is okay, you
can set the remote control as described in steps
1 to 6 for other devices. Then press the device
buttons SAT*), DVD*) or VCR*) instead of TV*).
If it is not okay, continue searching as described
in 1 to 6.
4 Controlling devices
To control a specific device, first press a device button, e.g.
TV*) to control the TV set and then the required function
buttons.
Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, Tel:+49(0)
4102231235, Fax: +49(0)4102 31444, e-Mail:
3
