Idiomas disponibles
Idiomas disponibles
possible that there are several suitable codes
and you should find out the most suitable.
2.
Switch on a program on your TV.
3.
Press the SET button, hold it down and at the
same time press a device button, e.g. TV*), until
the red lamp comes on.
4.
Then enter one of selected three-digit codes.
Key 0: please press key 10.
5.
When the first and second number buttons are
pressed the lamp goes out briefly; when the third
is pressed it stays out.
6.
Try out the functions. If everything is okay, you
can set the remote control as described in steps
1 to 5 for other devices. If it is not okay, try
another code for the same brand.
The letters on the device buttons TV1/TV2*), SAT1/SAT2*),
DVD1/DVD2*), VCR1/VCR2*) are for your orientation only.
You can set each type of device under any of the buttons.
If you do not find a suitable code for a device, look for it
using the code search.
*): All 4 keys of the device can be assigned twice so that 8
different devices can be controlled altogether. If you press a
key once according to these instructions you can enter a
device code for the first assignment or control the first
device. If you press a key twice within one second you can
set the key for a second device, or control a second device
via the key.
Code search
To control a TV:
1.
Switch on a program on your TV (on the TV
itself or with the original remote control).
2.
Press the SET button, hold it down and at the
same time press a device button, e.g. TV*), until
the red lamp comes on.
3.
Then press the SET button again briefly, the
lamp starts to blink.
Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg, Tel:+49(0)
4102231235, Fax: +49(0)4102 31444, e-Mail:
2
