Installing The Printer Driver Only - Brother P-touch 9500PC Referencia Rápida

→Installation begins.
→When installation is complete, the
message "Installation is done."
appears.
5 Click [Quit].
Click [Restart].
6
→Installation of P-touch Quick Editor
is complete, and the Macintosh will
restart.
7 After the Macintosh restarts, connect the
PT-9500PC to the Macintosh with the
USB interface cable, and then turn on the
PT-9500PC.
For details, refer to "Connecting to a
personal computer" (→ P.18).
Proceed to "Selecting the printer" (→
P.56).
54
Installing the printer driver
only
Install only the necessary printer driver to use
the PT-9500PC as a printer.
Note
●
Do not connect the USB interface cable
to the Macintosh until the printer driver
has been installed and the Macintosh has
been restarted. If the USB interface cable
is already connected to the Macintosh,
remove the USB interface cable.
1 Start the Macintosh, and then insert the
CD-ROM into the CD-ROM drive.
→The P-touch window appears.
Double-click the Mac OS 9 folder.
2
→The Mac OS 9 window appears.
Double-click the P-touch Editor 3.2
3
folder.
→The P-touch Editor 3.2 window
appears.