Product Cleaning; Product Disposal - Daga ET-250 Instrucciones De Uso

Electroestimulador digital
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

ENGLISH
INCIDENCE
The skin in the
treated areas
has reddened.
PRODUCT CONSERVATION
If you do not plan to use the appliance for an extended period of
time, you should store it in its original packaging in a clean, cool
and dry area. Always take the batteries out of the device when it is
not going to be used for a long time.
The electrodes should be kept with the original laminate storage
plastic while they are not being used. In this way they will not dete-
riorate or age prematurely. When the electrodes do not stick to the
skin, they should be replaced by new ones. For this you can acquire
them and the normal point of purchase or contact the DAGA custo-
mer service centre.

PRODUCT CLEANING

This product can only be cleaned by hand, using a soft cloth slightly
moistened with a mild soap. The use of abrasive cleaning products
or brushes, solvents, benzine, thinner or alcohol is completely pro-
hibited. Never immerse the appliance or any of its parts, except the
electrodes, in water or excessively moisten it in order to clean it. Do
not re-use the appliance until it is completely dry.
The electrodes can be cleaned with cold water to eliminate dirt
that is stuck to them. Avoid the use of hot water as it could deform
the electrodes. The electrodes should be left to dry in the open air
having been washed and will not be able to be used again until the
are completely dry.

PRODUCT DISPOSAL

Do not dispose of the product at the end of its shelf-life. Contact
the organic collection centre closest to your home in accordance
with the waste electrical and electronic equipment (WEEE) Directi-
ve 2012/19/EU to contribute to the protection of the environment.
Request detailed information regarding their current methods of
disposing of packaging and scrappage of used devices from your
distributor.
We hope that you will be satisfied with this product.
Manual Electroestimulador ET-250.indb 19
CAUSE
The time during which the
treatment has been applied
is excessive.
You suffer from illness or
disorders related to hyper-
sensitivity in the skin.
SOLUTION
Stop applying the
treatment to the redde-
ned zone until the state
of the skin returns to
normal. In the event
that the reddening per-
sists consult a Doctor.
Consult your Doctor to
know if you can conti-
nue to use this device.
19
11/1/16 15:11
Tabla de contenido
loading

Tabla de contenido