Preparatory Work - Dirt Devil AQUAclean Manual De Instrucciones
3-in-1 mopa multifuncional para vapor
Ocultar thumbs
Ver también para AQUAclean:
- Manual de instrucciones (178 páginas) ,
- Manual de instrucciones (206 páginas)
Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Preparatory work
Getting to know the appliance
Scope of supply:
Fig.
:
Handle;
Release key for the dual tank;
1
1
2
Appliance body;
Dual tank;
3
4
lease hand-held steam cleaner;
Compact brush;
Steam base;
7
8
Steam button;
On/Off button;
10
11
Quick release cord;
12
13
ic tube;
Steam booster;
14
sories bag;
360° adapter;
17
brush;
Spot jet nozzle;
20
Cleaning needle (optional*)
22
Fig.
:
Low disbursement of steam and deter-
2
1
gent;
Maximum disbursement of steam and deter-
2
gent;
Low steam;
Maximum steam;
3
4
ready indicator;
Program selector key;
6
On/Off button
7
Unpacking and assembling
Check that the unpackaged contents are com-
1
plete. If you notice any transport damage or if any-
thing is missing, contact your dealer immediately.
Attach the telescopic tube onto the steam base
2
(fig.
).
Attach the appliance body onto the tele-
3
3
scopic tube (fig.
).
4
Assembling the wall mount
The wall mount can either be assembled with screws
or the adhesive strips (fig.
Assembly with adhesive strips
Position the steam cleaner on the wall. Make sure
1
that the steam base rests flat on the floor.
the adhesive strips (fig.
to the steam cleaner.
4
press the handle with the wall mount against the
wall (fig.
).
7
Assembly with screws
Latch the wall mount to the steam cleaner.
1
determine the position of the wall mount, hold the
wall mount with the steam cleaner against the wall.
Make sure that the steam base rests flat on the floor.
Now remove the steam cleaner while holding the
wall mount in position.
the scope of supply to attach the wall mount (fig.
Quick re-
5
Telescopic tube;
6
Carpet glider;
9
Release pedal of telescop-
Wall mount;
Acces-
15
16
Jet nozzle;
Soft
18
19
2 × Microfibre pad;
21
Steam
5
–
).
5
7
Remove
2
).
Latch the wall mount
5
3
To attach the wall mount,
2
Use the screws included in
3
EN
Filling the dual tank
!
WARNING!
Hot surface! Fill the dual tank only after the appli-
ance has cooled down.
Removing the dual tank
If the dual tank must be filled during the cleaning
1
process, switch off the steam cleaner (fig.
allow it to cool down.
dual tank (fig.
1
the appliance body (fig.
on a level surface.
Filling up with water
NOTE:
Only fill water in the water tank. Do not add de-
tergents or any other additives to the water tank.
To open the tank lid of the water tank
1
(fig.
/
), pull on the tab of the tank lid.
9
2
water tank and close the tank by pressing the tank lid
back in place.
Filling up with detergent
CAUTION!
Use only the detergent ordered from us.
To open the tank lid of the detergent tank
1
(fig.
/
), pull on the tab of the tank lid.
9
1
detergent tank to the filling line with water.
the detergent until the tank is full.
by pressing the tank lid back in place.
Inserting the dual tank
Make sure that the water filter is correctly insert-
1
ed, (fig.
).
Position the bottom part of the dual
10
2
To
tank in the appliance body and push the dual tank
into the catch until you hear it click in place.
Connecting appliance to power supply
Make sure that the steam cleaner is switched off
1
(fig.
/
).
Unwind the cord completely from the
2
7
2
quick releases (fig.
).
6
mains socket.
Press the release key for the
2
/
) and remove the dual tank from
2
).
Place the dual tank
8
3
Close the tank
4
/
).
Insert the plug into a
1
12
3
21
/
) and
2
7
Fill the
2
Fill the
2
Add
3
Tabla de contenido
