Tools; Voice Commands - Pantech U.S. Cellular Verse Manual De Usario

VOICE COMMANDS

Your phone is equipped with an Advanced Voice Commands (AVC) feature. This feature
allows you to make calls or use the phone' s functions by simply using your voice. All
you have to do is talk into the phone and then the phone will recognize your voice and
complete tasks by itself.
1. Slide the phone up, press the
1.

Tools,

1. Voice Commands.
Shortcut: From idle mode, press the Voice Commands Key (located on the left side of
the device) to access the Voice Commands menu.
2. The phone displays the Voice Commands menu and prompts you to say the name
of the command you want to use. To complete your task, simply follow the voice
prompts. You can speak the name of the command after you hear a beep.
3. Select one of the following options, then press the
Call <Name or #> / Send Text <Name or #>
Send Video <Name or #> / Lookup <Name>
Play <Playlist> / Check <Item>
Voice Commands menu information appears, press the Left Soft Key
Press the Right Soft Key [Settings] to access
refer to page 69 for more details on
4. When it recognizes one of these commands, the phone launches the associated
application. If the phone does not hear a command within approximately eight
seconds, AVC mode will turn itself off.
CALL <NAME OR #>
Use the Call command to voice dial a name from your Contact List or a phone number.
When dialing a number, pronounce each digit, but do not pause noticeably between
the digits.
1. You will hear Say a Command
displayed.
66
Key [MENU], then press 9. Tools & Settings,
Key.
/ Send Picture <Name or #>
/ Go To <Menu> / Redial
[Tutorial].
Voice Commands Settings. Please
Voice Commands Settings.
and the Voice Commands menu will be
2. If calling a contact from your Contact List, say Call <Name>. Your phone will
ask you to confirm the name you said. Say "Yes" if it was repeated correctly.
That phone number will be dialed. If there is more than one number saved for
that contact, you will be asked to confirm which number to dial.
Example: Call John Smith Mobile
SEND TEXT < NAME OR #>
Use the Send Text command to send a text message to a specified name or number.
1. You will hear
displayed.
2. Say "Send Text" followed immediately by Text Message.
Example: Send Text Tom Smith.
SEND PICTURE <NAME OR #>
Use the Send Picture command to send a multimedia message to a specified name or
/
number.
/
1. You will hear
displayed.
2. Say "Send Picture" followed immediately by Picture Message.
Example: Send Picture Tom Smith.
SEND VIDEO <NAME OR #>
Use the Send Video command to send a multimedia message to a specified name or
number.
1. You will hear
displayed.
2. Say "Send Video" followed immediately by Video Message.
Example: Send Video Tom Smith.
Say a Command and the Voice Commands menu will be
Say a Command and the Voice Commands menu will be
Say a Command and the Voice Commands menu will be
01
02
03
04
05
06
07
67