Use Limitations; Maintenance, Storage; Battery Charger - Stiga AB 500 Li 48 Manual De Instrucciones

Use limitations

• Do not use the machine if
you are unable to hold it with
both hands or keep steady
on your legs while working.
• Never use the machine
with damaged, missing or
incorrectly positioned
• Never use the machine
without having installed all
the attachments required
for each use (as blower
or vacuum collector).
• Never disengage, deactivate,
remove or tamper with
the safety systems/micro
switches installed.
• Do not use the power tool
if the switch does not turn it
on and off. Any power tool
that cannot be controlled
with the switch is dangerous
and must be repaired.
• Do not strain the machine
too much and do not use a
small machine for heavy-
duty work; if you use the right
machine, you will reduce the
risk of hazards and improve
the quality of your work.
2.4 MAINTENANCE,
STORAGE
Ensure regular maintenance
and correct storage to
maintain machine safety and
high performance levels.
Maintenance
• Never use the machine with
worn or damaged parts.
Faulty or worn-out parts
must always be replaced
and never repaired.
• Cleaning and user
levels shown in these
instructions are the maximum
levels for use of the machine.
guards.
Suitable preventive measures
must be adopted to eliminate
possible harm caused by high
noise levels and vibration-
induced stresses; utilise the
machine at constant speed,
firmly hold the handgrip with
adequate strength, utilise the
machine at the minimum speed
required to perform the work,
wear ear-protection devices,
make frequent and adequate
pauses during the work.
Storage
• To reduce fire risks, do
safety instructions are in addition
to the safety requirements
provided in the specific battery
and battery charger manual
delivered with this machine.
• Only use battery chargers
EN - 5
maintenance shall not be made
by children without supervision.
The noise and vibration
not leave containers with
debris inside a room.
2.5 BATTERY / BATTERY
CHARGER
IMPORTANT The following
recommended by the
manufacturer to recharge
batteries. An inadequate
battery charger may cause
electric shock, overheating
or corrosive liquid to
leak from the battery.