Futurelight PPP-60 Manual Del Usuario página 15

Connection of the devices
Installation PPP-60:
Set up the metal frame (feet pointing downwards) at the desired position.
Insert LED lamp frame carefully into the metal frame. Please make sure that the cables are always pointing
downwards.
Now attach glass panel carefully onto the appropriate rubber ring in the metal frame.
Connecting several PPP-60:
Please use the enclosed screws to mount several panels. Every panel features 2 locking eyes at every side
of the metal fram in order to connect several panels.
Danger of trippling! Via the adjustable feet, the surface of the PPP-60 must always be levelled at the same
height.
Installation side ramp:
Insert the 4 locking bolts of the side ramp into the 4 locking eyes of the PPP-60 metal frame.
Danger of trippling! Via the adjustable feet, the surface of the PPP-60 and the ramps must always be levelled
at the same height.
Install all side ramps and make sure that the surfaces of the panels and of the ramps are at the same height.
15/30 00016794.DOC, Version 1.2