Clatronic MRC 832 P Instrucciones De Servicio página 50

Buzzer alarm
• If you do not want to wake up with the radio signal, turn the VOLUME control (10) to
"OFF" until it snaps into place.
• Instead of the radio, the buzzer goes off when the alarm time is reached.
NOTE: The volume of the buzzer cannot be changed.
Turning off the Alarm
In order to turn off the alarm, move the function switch (7) to the OFF position.
Automatic Alarm Interval
The automatically set alarm function can be shut off for approximately 9 minutes with the
SNOOZE key (13).
The delayed switch-off function can be used when the switch is in the positions AUTO or
OFF.
• When the SLEEP button (4) is pressed the radio switches off after a maximum of
1 hour and 59 minutes. The switch-off time can be adjusted by pressing the SLEEP
and the HOUR button (11), or the MIN button (8) at the same time.
• This function can be cancelled with the SNOOZE key (4).
You can use this unit to project the time onto a wall or the ceiling.
GB
• You can switch this function on and off with the ON/OFF / PROJECTION button (3).
• Swivel the projector (2) to the desired position.
• The left side of the projector has the FOCUS setting wheel (16) with which you can
adjust the sharpness of the projection.
1. By pressing the SET button (17), you can choose between different displays:
Press 1 x: Display the date.
Press 2 x: Display the seconds. Press the MODE button (18) to set the seconds to
zero.
Press 3 x: Display the time again.
50
Delayed Shut-Off
Projection