KNOW YOUR CHAIN SAW
READ THIS
INSTRUCTION
MANUAL
AND SAFETY
RULES
BEFORE
OPERATING
YOUR
CHAIN
SAW.
Compare
the illustrations
with your unit to familiarize
yourself with the location
of
the various
controls
and adjustments.
Save this manual
for future reference.
Front Handle
Chain
Front Hand Guard
/
Adjustment
Tool
_
Starter Rope
(Bar Tool)
Chain
Muffler
ON/STOP
Switch
Choke/
Pastldle
Lever
Bar
Sprocket
Hole
Throttle
Lockout
Rear
Handle
Bar Oil Fill Cap
Starter Housing
Cylinder
Cover
Fuel Mix Fill Cap
Chain
Primer Bulb
Chain
Direction
of Travel
Throttle
Trigger
Clutch Cover
Bar Nuts
ON/STOP
SWITCH
The ON/STOP
SWITCH
is used to stop the
engine.
THROTTLE
TRIGGER
The THROTi-LE
TRIGGER
controls engine
speed.
THROTTLE
LOCK-OUT
The
THROTTLE
LOCK-OUT
must
be
pressed
before you can squeeze
the throttle
trigger. This feature prevents
you from acci-
dentally squeezing the trigger.
CHOKE/FAST
IDLE
LEVER
The choke and fast idle are set by pulling the
CHOKE/FAST
IDLE LEVER out to the full ex-
tent for cold starting
or after refueling. The
choke provides
additional
fuel to the engine
during cold starting.
PRIMER
BULB
The PRIMER BULB circulates fuel to the car-
buretor to provide quicker starting.
Guide Bar
Catcher
CHAIN
BRAKE
The chain brake is a device designed to stop
the chain if kickback occurs.
The chain brake
activates
automatically
in the event
of kick-
back. The chain brake activates manually if the
front hand guard is pushed forward. The chain
brake is disengaged
by pulling the front hand
guard back toward the front handle as far as
possible.
CHAIN
TENSION
It is normai for a new chain to stretch during the
first 15 minutes of operation. You should check
your
chain
tension
frequently.
See
CHAIN
TENSION
under the ASSEMBLY
section.
_L, WARNING:
Muffler is very hot dur-
ing and after use. Do not touch the muffler or
allow
combustible
material
such
as
dry
grass or fuel to do so.