Sensor-Specific Parameters - Balluff BIP LD2-T017-04-BP Serie Manual De Instrucciones

BIP LD2-T017-04-BP _ _ / BP _ _ -S4
Inductive Positioning System
6
IO-Link interface (continued)
6.5 System parameters
Index Parameters
Hex. Dec.
000D 13 Profile
characteristic
000E 14 PDInput
descriptor
Tab. 6-6: System parameters
6.6

Sensor-specific parameters

Index Parameters
Hex. Dec.
0052 82 Internal temperature 00
0056 86 COMx speed
00C0 192 Gradient
00C1 193 Offset
00C5 197 Inversion
00C8 200 Slmin[μm]
Slmax[μm]
1) Please note that floating point values have Little-Endian coding and start with the LSB.
2) Curve inversion deletes any previously set switching points.
Tab. 6-7: Sensor-specific parameters
12 english
Subindex Parameters
Hex. Dec.
01 1 DeviceProfileID
02 2 FunctionClassID
03 3 FunctionClassID
04 4 FunctionClassID
01 1 BDC1,BDC2,
BDC3
02 2 PDV1
03 3 PDV2
Subindex Data format
(length)
Hex. Dec.
0 Char (1 byte)
00 0 Char (1 byte)
00 0 Float32
00 0 Float32
00 0 UChar (1 byte)
01 1 UINT16 (2 bytes)
02 2 UINT16 (2 bytes)
Data format Access
UINT16 Read only 0x0001
OctetStringT3 Read only 0x010300 Switching channel
Access Value
range
Read only –128...+127 Output of all
Read only 2
(4 bytes) Read only
1)
(4 bytes) Read only
1)
Read/Write 0x00-0x01
Read/Write 0...4095
Read/Write 0...4095
Value Comments
range
Smart Sensor
Profile
0x8001 Binary data channel
0x8002 Process value
0x8004 Teach channel
0x010103 Out of Range
0x020C04 Position value
Comments
temperature
parameters (in °C)
IO-Link COM speed
Gradient of curve
(output → distance)
Curve offset
(output → distance)
Curve inversion
2)
Current value for
Slmin[μm]
Current value for
Slmax[μm]