HIKOKI DS 14DJL Instrucciones De Manejo página 8

English
WARNING
In order to prevent any battery leakage, heat generation,
smoke emission, explosion and ignition beforehand,
please be sure to heed the following precautions.
1. Make sure that swarf and dust do not collect on the
battery.
During work make sure that swarf and dust do not
fall on the battery.
Make sure that any swarf and dust falling on the
power tool during work do not collect on the battery.
Do not store an unused battery in a location exposed
to swarf and dust.
Before storing a battery, remove any swarf and
dust that may adhere to it and do not store it together
with metal parts (screws, nails, etc.).
2. Do not pierce battery with a sharp object such as a
nail, strike with a hammer, step on, throw or subject
the battery to severe physical shock.
3. Do not use an apparently damaged or deformed
battery.
4. Do not use the battery in reverse polarity.
5. Do not connect directly to an electrical outlets or
car cigarette lighter sockets.
6. Do not use the battery for a purpose other than
those specified.
7. If the battery charging fails to complete even when
a specified recharging time has elapsed,
immediately stop further recharging.
8. Do not put or subject the battery to high
temperatures or high pressure such as into a
microwave oven, dryer, or high pressure container.
SPECIFICATIONS
POWER TOOL
Model
No-load speed (Low / High)
Wood
(Thickness 18 mm)
Drilling
Metal
Capacity (Thickness 1.6 mm)
Machine screw
Driving
Wood screw
Rechargeable battery
Weight*
* Weight: According to EPTA-Procedure 01/2003
CHARGER
Model UC18YKSL
Charging voltage
Weight
8
6.0 mm (diameter) × 75 mm (length)
(Requires a pilot hole)
BSL1415: Li-ion
14.4 V (1.5 Ah 4 cells) 14.4 V (2.5 Ah 4 cells)
UC18YFSL
14.4 V – 18 V
0.35 kg 0.5 kg
9. Keep away from fire immediately when leakage or
foul odor are detected.
10. Do not use in a location where strong static
electricity generates.
11. If there is battery leakage, foul odor, heat generated,
discolored or deformed, or in any way appears
abnormal during use, recharging or storage,
immediately remove it from the equipment or
battery charger, and stop use.
CAUTION
1. If liquid leaking from the battery gets into your
eyes, do not rub your eyes and wash them well
with fresh clean water such as tap water and contact
a doctor immediately.
If left untreated, the liquid may cause eye-problems.
2. If liquid leaks onto your skin or clothes, wash well
with clean water such as tap water immediately.
There is a possibility that this can cause skin irritation.
3. If you find rust, foul odor, overheating, discolor,
deformation, and/or other irregularities when using
the battery for the first time, do not use and return it
to your supplier or vendor.
WARNING
If a conductive foreign matter enters in the terminal of
lithium ion battery, the battery may be shorted, causing
fire. When storing the lithium ion battery, obey surely
the rules of following contents.
Do not place conductive debris, nail and wires such
as iron wire and copper wire in the storage case.
To prevent shorting from occurring, load the battery
in the tool or insert securely the battery cover for
storing until the ventilator is not seen. (Fig. 1)
DS14DJL
0 – 450 / 0 – 1250 min
30 mm
Steel: 13 mm,
Aluminum: 13 mm
6 mm
BSL1425: Li-ion
1.6 kg
DS18DJL
–1
38 mm
6.8 mm (diameter) × 50 mm (length)
(Requires a pilot hole)
BSL1815: Li-ion BSL1825: Li-ion
18 V (1.5 Ah 5 cells) 18 V (2.5 Ah 5 cells)
1.7 kg