Change Of Depth Units; Auto Back Light - RIDGID NaviTrack Scout Manual Del Usuario

Ground
Signal
Energized Pipe
Micro map - Example – Line Trace
7. Tools Menu

7.1 Change of Depth Units

The Scout can change the units that it measures depth in to either Feet or
Meters. To change these settings simply highlight the depth icon in the Tools
Menu and then press the select key to toggle between feet or meters.

7.2 Auto Back Light

Low light levels are sensed by a light detector built into the upper left corner
of the keypad. The backlight can be forced on by blocking the light to this
sensor with a thumb.
Signal
NaviTrack Scout
The automatic LCD backlight is factory set to only turn on under fairly dark
conditions. This is to conserve battery power. As the batteries near depletion,
the backlight will appear dim. Near the end of battery life, the backlight
operates at a very low level to conserve battery power.
To turn the backlight off, highlight the light bulb icon in the tools section of
the menu and press the select key to toggle between Auto and OFF.
7.2.1 LCD Contrast
When this is highlighted and selected the LCD contrast can be adjusted with
the up and down arrows.
13