Tabla de contenido
Idiomas disponibles
Idiomas disponibles
DIRECTIONS FOR DIGITAL NUWAVE OVENS
NuWave Oven Pro
1
Display
Panel
4
4
7
7
EASY START: Oven is preset to cook at Power Level 10
To start cooking, press COOK TIME button, enter time required,
press START. If cooking at any other power level other than HI(10),
Power Level button will be needed. See "Setting Power Level".
CONTROL PANEL ON POWER HEAD -
window when program is clear
SETTING COOK TIME
Press the COOK TIME Button. The MIN indicator will flash in the lower
right corner of the display panel. Enter the required time in hours and
minutes by pressing the corresponding numerals. For example, 1 hour
and 30 minutes would be entered by pressing 130. The display panel
will show 1:30. If required time is in minutes, you only need to enter 1 or
2 numbers. For example, 5 minutes just push #5; 46 minutes, push 46.
If the number needs to be corrected, clear the entry by pressing
pause/clear button twice. Then reenter the correct numbers.
START COOKING
Press START to begin cooking. The remaining cooking time will appear
in the display panel and the colon between the hours and minutes will
blink ON and OFF. The oven will automatically stop cooking when the
time has expired and will beep to alert you that it has stopped.
PAUSE / CLEAR COOKING
To PAUSE the cooking time, press the Pause/Clear button one
time. The remaining cooking time will stay in the display panel but the
colon will not be blinking.
To CLEAR the cooking time, press the Pause/Clear button twice. The
remaining cook time will be fully cleared and a "0" will appear.
Cook Time
Start
2
3
Cook
2
Time
3
Start
Start
Pause / Clear
5
6
Power
5
Level
6
Pause
Pause
8
9
Clear
Clear
Reheat
Reheat
8
9
0
Power Level
0
Reheat
"0" should appear in
7
SETTING POWER LEVEL*
• Press the POWER LEVEL button.
• The default "HI" setting is indicated in the display panel (power level 10)
• PWR indicator flashes in the display panel. To override the default and
change the power level, just press the desired cooking power:
1(10% power) to 9(90% power). The power is entered as a single digit
like 9 or 3. To reset to HI, press 0.
• Verify the correct power setting on the control panel.
• If power setting needs to be corrected, reenter the required number.
• To check power level during cooking, press POWER once and setting
will appear on the display panel for a few seconds. Remaining cooking
time will then reappear.
NOTE : Maximum allowed cook time for HI power is 2 hours. If
cooking time is set to more than that, it will automatically revert back to
2:00 hours. Simply add more time after the initial 2 hours has expired.
For lower power settings, maximum allowed time is
9 hours 59 minutes.
*Do not press Power Level unless you want to change the Default
setting (power level 10).
Power Level Settings:
Power Level
Oven temperature
10 (HI)
345 °F / 174 °C
9
325 °F / 163 °C
8
300 °F / 149 °C
7
275 °F / 135 °C
6
250 °F / 121 °C
5
225 °F / 107 °C
4
175 °F / 79 °C
3
150 °F / 66 °C
2
116 °F / 47 °C
1
106 °F / 41 °C
REHEAT FUNCTION
All Digital Ovens are equipped with a REHEAT button. This can be
used to reheat single portion sized foods. To activate the reheat
function, make sure program is clear (pause/clear button). LCD will
read 0. Press REHEAT button. This will program power level HI for 4
minutes. Press START. Alarm will beep when time has expired.
Example, if you are reheating left over pizza, simply place the slice on
the 4 inch rack, press reheat, then start. If you reheat a rice or noodle
dish, place the single serving amount on an oven safe dish or on a
piece of foil. If you want the rice or noodles softer, cover with foil and
add a sprinkle of water.
Press Button:
Panel Display
0 (High)
PHI
9
P90
8
P80
7
P70
6
P60
5
P50
4
P40
3
P30
2
P20
1 (Low)
P10
8
Tabla de contenido
