Switching On And Off; "Heating" Mode - AERMEC FMT20AW Manual De Uso

USE

SWITCHING ON AND OFF

Press the button to switch the fan coil on or off.
For correct working, before switching the fan coil on, check that water is
circulating in the system at a suitable temperature for the working mode
you have selected. In particular, check that, in winter functioning, the heat
pump or boiler is switched on, and in summer functioning, the chiller is
switched on.
FMT20AW can also be used with fan coils for sensitive-only cooling.
SELECTION OF THE WORKING MODE
Press the button repeatedly to set the working mode:
The working modes are:
HEAT - heating of the air.
Maintains the desired temperature in the room. On the display, the symbol
COOL - cooling and dehumidifi cation of the air.
Maintains the desired temperature in the room.
On the display, the symbol
AUTOMATIC - the thermostat automatically selects the Heating or Cooling mode, depending on the temperature set and the
temperature of the air in the room.
Maintains the desired temperature in the room. On the display, the symbols
FAN - the fan coil is activated in "Ventilation Only" mode, even with the boiler, heat pump and chiller switched off.
On the display, the symbol
"COOLING" mode
Use the key to select the Cooling working mode; the symbol
appear on the display.
Using the keys / , select the desired temperature; the corresponding
values will appear on the display.
Using the key , select the desired ventilation speed;
the set speed , ,
It is necessary for the water in the system to be at a suitable temperature.
10
appears.
appears.

"HEATING" MODE

Use the key
appear on the display.
1
Using the keys
values will appear on the display.
2
Using the key
2
the set speed
It is necessary for the water in the system to be at a suitable temperature.
and will appear on the display.
"AUTOMATIC" mode
Use the key
will appear on the display.
1
Using the keys
values will appear on the display.
Using the key
the set speed
Depending on the temperature set, the Heating or Cooling working mode
will be automatically activated.
It is necessary for the water in the system to be at a suitable temperature.
appears.
appear.
to select the Heating working mode; the symbol
/ , select the desired temperature; the corresponding
, select the desired ventilation speed;
, , and will appear on the display.
will
to select the Automatic working mode; the symbols
/ , select the desired temperature; the corresponding
, select the desired ventilation speed;
, , and will appear on the display.
1
will
1
2
2